What do you think about the condition of this board??

What do you think about the condition of this board??

Postby surf patrol » Sat Jun 02, 2007 1:31 am

Posted by 07churcb

Hi Guys,
New to the forum and was just looking for some advice.
I've been surfing a few times, had a few lessons, and used my friends mini-mal a fair bit. Now i think its time to buy a board of my own. I was thinking a Bic 6'7", im on a tight budget and hear these a quite good for progressing from a mini-mal.
Which brings me on to this board. Its being advertised really cheaply and its what im looking for, so i thought 'hmmm, could be on to a winner here'.
I just want to get your opinion on the condition of it. It has loads of superficial dents on it, nothing too serious i dont think and again i emphasise, it is really cheap.
Heres some pics:
Image
Image
Image
Image

Cheers
User avatar
surf patrol
Site Admin
 
Posts: 3237
Joined: Sat Oct 11, 2003 3:26 am

Sponsor

Sponsor
 

Postby drowningbitbybit » Sat Jun 02, 2007 9:28 am

Blimey, thats beaten up for a pop-out! :shock:
Proof that you can ding 'em after all :lol:

As long as none of those dings have gone through the shell (whats the right word on a pop-out?) then you should be okay. I wouldnt pay much for it though.
User avatar
drowningbitbybit
Surfing Legend
 
Posts: 5186
Joined: Tue Feb 15, 2005 11:16 am
Location: Coogee, NSW, Australia.

Postby northswell » Sat Jun 02, 2007 9:39 am

If you have only been surfing a few times and had a few lessons i'd steer well clear of that board. I think you need something bigger. Obviously its all about hight weight and ability, but unless your a grom i wouldn't bother.
User avatar
northswell
SW Pro
 
Posts: 1449
Joined: Fri Nov 03, 2006 9:49 pm
Location: East Side and Bogged down working on the website www.northswell.co.uk

Postby drowningbitbybit » Sat Jun 02, 2007 9:41 am

northswell wrote:If you have only been surfing a few times and had a few lessons i'd steer well clear of that board. I think you need something bigger.


Wasn't even going there :wink:
User avatar
drowningbitbybit
Surfing Legend
 
Posts: 5186
Joined: Tue Feb 15, 2005 11:16 am
Location: Coogee, NSW, Australia.

Postby 07churcb » Sat Jun 02, 2007 10:04 am

do you think £60 for its ok, or is that still a bit much considering the condition of it??
cheers.
07churcb
New Member
 
Posts: 2
Joined: Fri Jun 01, 2007 5:45 pm

Postby 07churcb » Sat Jun 02, 2007 10:44 am

sry guys....any of you know whether thats a good deal or not?? need some feedback soon, as i am going to view it this afternoon and will probably put an offer in.
07churcb
New Member
 
Posts: 2
Joined: Fri Jun 01, 2007 5:45 pm

Postby drowningbitbybit » Sat Jun 02, 2007 10:48 am

£50.
Thats fine.
User avatar
drowningbitbybit
Surfing Legend
 
Posts: 5186
Joined: Tue Feb 15, 2005 11:16 am
Location: Coogee, NSW, Australia.

Postby Surfing-Innovation » Sat Jun 02, 2007 11:25 am

£60 - personally, I'd spend a bit more and get something in better nick .........
User avatar
Surfing-Innovation
Local Hero
 
Posts: 381
Joined: Tue May 01, 2007 3:37 pm
Location: www.surfing-innovation.com

Postby Driftingalong » Mon Jun 04, 2007 1:56 pm

Hey, I'm a little late on the reply but...


It's got quite a few dents on the bottom. :o

But, for 60 pounds I'd say go for it. It'll probably be a good transition board and you're saving a good bit of money to get a real nice one after this.
User avatar
Driftingalong
SW Pro
 
Posts: 1005
Joined: Tue Sep 20, 2005 1:45 pm
Location: OC, MD

Postby sebastiansurfer » Wed Jul 30, 2008 3:42 am

ding king!
User avatar
sebastiansurfer
Local Hero
 
Posts: 246
Joined: Mon Jun 30, 2008 8:10 pm
Location: floorida

Postby crepuscular » Wed Jul 30, 2008 4:00 am

pressure dings not really anything, you get it with any board, even with the first ride...
crepuscular
Local Hero
 
Posts: 239
Joined: Fri Nov 30, 2007 1:12 pm
Location: Bondi, Australia

Postby sebastiansurfer » Wed Jul 30, 2008 4:13 am

oh i know but i like declaring peoples boards ding kings lol
id say go for it
User avatar
sebastiansurfer
Local Hero
 
Posts: 246
Joined: Mon Jun 30, 2008 8:10 pm
Location: floorida



Similar topics


Return to Surfing Hardware

Forum Only Advanced Search
Follow Us