I've been asked for some advice on board care, so here goes:
For the most part, board care is fairly obvious. Don't bash your board about too much, transport it in a bag. With custom boards, I would recommend a bag at least 5mm thick.
Put some padding of some kind on roofracks before tying the board down, always put some padding between boards if transporting more than one (or put them both in board bags).
Don't store it in direct sunlight for long periods - this can discolour the foam and weaken the glass (or so I've heard).
When stripping wax off, use a wax comb or old credit card, but make sure the edges are smooth, you don't want to scratch the board. Do NOT, as I did with my first custom board, think - 'hey boiling water would melt this wax right off' I knackered the glass on the deck of my board doing this and ended up with lovely yellow foam.
Try not to stand it on it's tail. It looks very cool when you see people come up the beach and wedge their boards into the sand so they stand on their own. I saw someone do this once and there was a pebble under the sand, he smashed his tail to bits!!.
If you are going to store it in its bag, try and let it dry off first - this doesn't help with the care of it, but it makes it smell nicer next time you come to get it out.
Ideally always put your board on something soft.
Hope this helps